|
Post by admin on Jun 21, 2016 12:20:55 GMT
Read the explanations on the flyer (inside the Box):
1. Put the Right earphone in the R dimple inside the box: • The earplug look toward the bottom of the box. • The pins on the box touch the electrical contact pad on the earphones.
2. Push the earphone with your finger by on the edge close to the button - , then the LED lights red, so you know the earphone is in the correct position.
3. Do the same with Left earphone.
4. Close the box.
5. On the Box back, the 3 white LED are lit one by in loop and let you know charging earphones has already started.
Note: When LEDs remain lit, they show the Box state of charge (it also means the earphone batteries are already full charged).
Note: Press on both buttons +/- on the same time for 6 sec, then a voice tell you the level of charge (low/middle/high).
|
|