|
Post by admin on Jun 21, 2016 8:38:45 GMT
So easy!
You have a set of rings of different colors.
1. First, take off the ring on the earphone (from the side where is the button ► for example).
2. Check the L/R marking inside the ring, and pick a new ring with the same marking.
3. Locate where the 2 buttons on the casing match with the + / - markings on the ring. The ► on the ring also has to match with the button on the casing.
4. Then, put the new ring on.
5. Be sure the edges of the rings cover the edges of the housing on each side. You can press with your nail on the edge to insert them better.
|
|